Equipment Division

We have worked with a variety of process industries over last decades, and experienced the solution and engineering behined complex and challenging assignment. For a worldclass design, engineering and manufacturing it takes platform of whole set of modern machineries, expertise, tools and tackles and infrastructures. We have learned a lot and evolved as a pioneering entity by implementing greater amount of innovation in our production capabilitiese. Besides, the ambitious efforts of our team members make us accountable to deliver excellence that is being reviewed multiple times during the in-house and external testing phases. we not only offer the plaform for accurate and effecient engineering solution for your dream project but undertakes the full responsibility of building it at your door. We have developed an infrasturcture for shop and site works.

We have 20000sq.ft area with three bays which are equipped with 20tonne crane and 10tonne crane having all the machineries for fabrication landing to a capacity of 60-100 tonne capacity per month.

We manufacture Pressure Vessel, Heat Exchanger, Reactor, Distillation column, storage tanks, reboiler, seperators, mixer, twin pot and shaft mixers etc.

Benefits and Salient FEATURES with our manufacturing

Inhouse Design, Drafting, Quality inspection team.

Qualified ARC welders and Argon welders.

Hydrostatic test pressure upto 40 bar.

Vacuum test – We offer vacuum test.

Running trial – for vessel with agitator for minimum 12 Hr. under full load.

All the high & medium speed stirrers are dynamically balanced.

Trial of high speed & low speed stirrer done on specially made platform for Air Running to measure run-out easily and thereafter the stirrers are mounted on the vessel.

Periodically tests of all the welders for their X-ray quality welding qualification from third party inspection agency

We can get anti-corrosive lining done from reputed vendors and inspect it for quality work, especially for the equipment manufactured by us, as we are well aware about the surface finishing required for lining.

1. Fabrication Capacity upto 100kl x 10metre height x 4metre diameter.
2. Available Inhouse Design, Drafting, Quality inspection team.
3. Offering in all MOC mainly Stainless Steel 316, 304 or Carbon Steel material.
4. Spirals welded on outer surface of the main vessel for uniform circulation of heating or cooling media like steam, oil, water etc. And also provides extra strength to the main vessel
5. Adheres to ASME and other standards with special attention to Argon and Arc welding procedures
6. Save Energy using two part Jacket design for smaller batch
7. GMP range of equipments available for Pharmaceutical industry. With mirror finish from 220 grit to 440 grit, smooth welding, flush grinding and Insulation with mirror finished S.S cladding
8. Full assistance in Erection, commissioning, installation, testing

1. Fabrication Capacity upto 40kl x 10metre height x 4metre diameter.
2. Available Inhouse Design, Drafting, Quality inspection team.
3. Limpeted and Jacketed Reactor reactor can be used for heating or cooling of the reactants
4. Design available for high temperature ( Above 150 C) Thermic fluid oil like such as Therminol™, and Dowtherm
5. Achieve heating and cooling in one reactor with Double coil design
6. GMP range of equipments available for Pharmaceutical industry. With mirror finish from 220 grit to 440 grit, smooth welding & flush grinding and Insulation with mirror finished S.S cladding
7. Agitator design to suit the reactants viscosity and density
8. Adheres to ASME and other standards with special attention to Argon and Arc welding procedures
9. Save time and money with our Value added products and services like Process Automation, valves and fittings
10. Manufactured as client specifications
11. Full assistance in Erection, commissioning, installation, testing

1. Fabrication Capacity up to 30metre height x 4metre diameter.
2. Available Inhouse Design, Drafting, Quality inspection team.
3. We manufacture complete distillation system or individual equipment for distillation process
4. All equipment available in Carbon steel or Stainless steel
5. Manufactured as per clients drawings and specifications
6. Strident quality assurance system
7. Manufactured as per ASME
8. Full assistance in Erection, commissioning, installation, testing

1. Fabrication Capacity upto 500sq.mt x 4metre diameter.
2. Available Inhouse Design, Drafting, Quality inspection team.
3. Adheres to TEMA, ASME and other standards with special attention to Argon and Arc welding procedures
4. Also offered with fin tube or corrugated tubes. As these design offered higher heat transfer area.
5. Offered in Carbon Steel, Stainless steel, Copper tubes
6. Manufactured as per specifications
7. Full assistance in Erection, commissioning, installation, testing

1. Fabrication Capacity up to 5000kl x 20metre height x 10metre diameter.
2. Available Inhouse Design, Drafting, Quality inspection team.
3. Horizontal chemical tank with flat end or dish end design
4. Space saving design in vertical tanks with Top and Bottom dish end type Or Flat bottom and top conical design
5. Monkey ladder and safety cage on the outer side and optional ladder inside for safe man movement
6. External rafter channel is welded on the top conical portion of the tank to strengthen it
7. Available in Carbon Steel as well Stainless steel

Skid system is a very complex front-end engineering design, construction, installation and commissioning to long-term operations and maintenance. BE&C is having both strong process & mechanical engineering hence we offer tailored and custom-built chemical, oil and gas skids, making us the most preferred skid mounted system manufacturers in India.

1. Fabrication capacity available in all sizes as per basic engineering design
2. Available Inhouse Design, Drafting, Quality inspection team.
3. Space saving design with all manufacturing inhouse
4. Available in Carbon Steel as well Stainless steel